Guardian-technologies AC4010 User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 10
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
E-3 E-5E-4
INSTALLATION
Features: The lter is an all-in-one multi-stage lter.
Layers of air cleaning include:
1. Charcoal removes odors and smoke.
2. HEPA captures 99.97% of airborne dust and allergens.
3. PCO captures and dissolves airborne allergens and mold.
4. UV-light bulb works with lter to kill germs.
Cleaning the Unit
WARNING: To avoid serious injury from electric shock, the
unit must be turned OFF and unplugged from the power outlet
prior to any cleaning.
1. TURN THE UNIT OFF AND UNPLUG THE UNIT FROM THE
POWER OUTLET.
2. Clean unit with a soft, damp cloth only. DO NOT pour or splash
water on the unit or use any abrasive type cleaner. Clean all
external surfaces, especially the air intake grills and air outlet.
3. Reposition the unit, plug power cord into power outlet
and turn ON.
PROBLEM SOLUTION
Unit doesn't operate.
Check that unit is plugged in.
Check Safety Switch: Remove lter. Check
small metal safety switch. Switch cannot be
bent inside the unit.
Call Customer Service at 1.866.603.5900.
No air circulating from unit.
Unplug unit: Check lter and
remove bag before rst use.
Increase in noise level.
Make surelter is clean.
Replace. Unplug unit: Open
bottom, removelters and
make sure fan is clear.
Filter door does not
close properly.
Check that the installation of the
lter is correct.
TROUBLESHOOTING GUIDE
Safety
Switch
INSTALLATION
The lter can be found packaged inside the Air Purier. It is recommended
to replace thelter every six months to maintain optimal performance.
Replacement lter model number is FLT4010.
Installing the Filter
1. Unplug the air purier from the electrical outlet.
2. Lift to release the lter cover.
3. Gently pull lter from unit (*and
remove bag from the lter if the
unit is new).
4. Replace lter into compartment.
Make sure the dark gray side
faces up towards you.
5. To install new lter reverse steps 1-4.
Do NOT insert lter with
white pleated side facing up.
Dark gray side should
always face upwards.
Page view 2
1 2 3 4 5 6 7 8 9 10

Comments to this Manuals

No comments