Guardian Technologies AC6000 User Manual download pdf (Page 5)

E-8 E-9

INSTALLATION (cont.)

4. Remove the filters from the air purifier and discard the plastic bags.

5. Fill in the installation date on the “Filter Replacement Reminder” sticker

located on the HEPA filter box.

6. Put the PCO filter into the compartment of the main body. (1)

7. Put the HEPA filter into the filter compartment. Follow the arrow

direction on the side of the box for the correct direction. (2)

8. Put the Charcoal filter on top of the HEPA filter box. (3)

9. Put the pre-filter on top of the Charcoal filter. Slip the four tabs

on the pre-filter into the corresponding location slots on the filter

compartment. (4)

10. Insert the two bottom hinges of the front cover into the two

grooves located at the bottom of the main body. Gently press the upper

portion of the front cover towards the main body to close it. (5)

Note: The unit is equipped with a safety lock that allows it to operate only

when the front cover is properly closed.

INSTALLATION (cont.)

Installing batteries into the remote control.

1. Press and slide out the back cover.

2. Insert two AAA batteries according to the instructions shown

inside the battery compartment.

3. Close the back cover.

OPERATION

A. Power On/Off

1. Plug the electrical cord into an outlet.

2. Press the main ‘On/Off’ button to turn the unit on.

 The power of the air purifier will be turned on.

 The UV light bulb and the green ‘UV’ indication light will illuminate.

They will remain lit up while the unit is on.

AC6000_3L rev: Hygia 6.0 3L rev 8/30/07 1:50 PM Page 5

1 2 3 4 5 6 7 8 9 10 ... 23 24

No comments

Guardian Technologies AC6000 User Manual Page 5