Guardian Technologies , LLC Home Security System DVST User Manual download pdf (Page 22)

5.3 Remote Setup

Remote DVST units can also be set up in the same manner as a local DVST. The same

procedure should be followed when the DVST is on line to a remote unit. When the

SETUP key is pressed the screen will go blank and the command prompt REM> will

appear on screen.

Proceed as for the local system.

Note: A PC cannot initiate remote set up with the “+++” command.

5.4 DVST Commands

Most commands are typed in direct and terminated by pressing the <ENTER> key on a

PC.

HELP

Lists all commands available.

Note: Paragraphs 4.6 onwards detail the command information listed by the help option and

have been grouped together in the logical order that should be used when setting up a

DVST system.

QUIT

Exits the SETUP mode.

This returns the DVST to normal operation. If a MODEM is connected

and the DVST is set to MODEM=ON the initialisation strings will be

sent to the MODEM.

RESET

Resets DVST to factory defaults

This command is used to completely reset the DVST system.

(All values are reset to their default values.)

Note: These values are stored in an integrated circuit called an EEPROM. This is not

dependent on a battery backup and will retain its settings indefinitely without a power

supply.

VIEW

Display current DVST settings

This will display all the current DVST settings.

Page 10 Dedicated Micros Ltd

Setup DVST Installation Guide

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 79 80

No comments

Guardian Technologies , LLC Home Security System DVST User Manual Page 22