Guardian Technologies , LLC Home Security System DVST User Manual download pdf (Page 63)

AOUT=

Set alarm outputs AUTO / MANUAL

(default is AUTO)

The two alarm contacts can be configured for automatic or manual

operation.

AUTO

In automatic mode relay 1 acts as a line indicator and closes whenever

the DVST is on line.

MANUAL

In manual mode the AUX1 key on the local unit controls relay 1 on the

remote unit, this works as a momentary contact. AUX2 on the local unit

controls relay 2, which works as a toggle on / off (latching) control.

ALMODE=

...Set Alarm operation mode

NOFRZ/OLNFRZ/ FRZALL/TRKLST

(default, OLNFRZ)

NOFRZ

No freeze mode - No frozen images are sent. If several alarms ocour

to trigger the machine to dial, one shot from each will be sent in quick

succession without any operator control. Any alarms present whilst on

line will be indicated on the receive unit display baseline.

OLNFRZ

Offline alarm freeze - Only freezes the first alarm image and then

transmits this image to the receiver. Subsequent alarms incoming

while the uniit is transmitting to a receiver are flagged on the baseline

but are not frozen, nor do they need to be acknowledged.

FRZALL

Freeze all alarm images - All alarm images are frozen. All must be

acknowledged by the receiving station before the alarm can be

cleared.

TRKLST

Track last alarm - No frozen images are sent. If several alarms ocour to

trigger the machine to dial, one shot from each alarm will be sent in

quick succession without any operator control, following an intruder.

Any alarms present whilst on line will be displayed full screen and un

frozen.

Dedicated Micros Ltd Page 51

DVST Installation Guide Alarms & Events

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 79 80

No comments

Guardian Technologies , LLC Home Security System DVST User Manual Page 63