Guardian Technologies , LLC Home Security System DVST User Manual download pdf (Page 61)

12 Alarms & Events

12.1 Purpose & intended use

Alarm devices connected to DVST transmission products are intended to allow

verification and response to remote events.

12.2 Alarm Connections

Alarm connections are made via a 37 pin D type male connector which plugs into the

side panel of the DFT0150.

WARNING: The alarm outputs are light duty reed relay types and should not be used for switching

heavy loads.

12.3 ALARM Settings

ASYS=

Set alarm system ON or OFF

(default, OFF)

The alarm system is dormant until activated by the ASYS=ON

command.

When an alarm condition is detected the DVST transmitter dials stored

number TEL0 from the dial menu. If a connection cannot be made to

this number the unit dials stored number TEL1 from the dial menu. The

transmitter will continue calling until a connection is made and the

alarm is acknowledged from the receiver.

AON=n

AOFF=n

Enable alarm contact n

Disable alarm contact n

(default, all alarm contacts enabled)

By default all contacts are ON, or able to respond to contact closures

on the alarm input.

Alarm inputs that are not used should be set to off.

Dedicated Micros Ltd Page 49

DVST Installation Guide Alarms & Events

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 79 80

No comments

Guardian Technologies , LLC Home Security System DVST User Manual Page 61