Guardian Technologies , LLC Home Security System DVST User Manual download pdf (Page 56)

SPASSWORD=

Set SETUP password to ...

This feature allows an additional password to be allocated just to

provide security for the set up mode. This can be used to prevent a

remote user accessing the system and altering the settings.

Default: None set

Note: To maintain security, passwords cannot be read back from the system. Care should be

taken to ensure passwords are not lost as this will require a new EEPROM chip to be

fitted to the DVST.

10.2 On Screen Titling

SYSTEM=

Set system ID string to ...

This is a 30 character title which appears on the front screen of the

DVST. When a transmitter sends to a receiver this title is transferred

from the transmitter and appears on the baseline of the receiving

monitor.

TIME=

Set current time in HHMM format

The time is based on the 24 hour clock. 4 digits must be entered.

DATE=

Set current date in DDMMYY format

Date is always set as a six figure format.

Two optional messages are superimposed on camera images sent from the transmitter.

The first is the camera title and the second is the time and date.

TLPOS=

Set camera title position

(default, 1)

When the images are transmitted the camera title appears at the top of

the screen. This setting adjusts the height of the camera title.

TDPOS=

Set clock screen position

(default, 11)

When the images are transmitted the time & date appears at the

bottom of the screen. This setting adjusts the height of the time & date

information.

Note: The range available for both TLPOS and TDPOS is from 1 to 11, 1 is at the top of the

screen and 11 at the bottom. Settings for TLPOS and TDPOS should be 2 numbers

apart to avoid overlap. Setting either value to 0 removes the text from the screen.

Page 44 Dedicated Micros Ltd

Calls DVST Installation Guide

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 79 80

No comments

Guardian Technologies , LLC Home Security System DVST User Manual Page 56