Guardian Technologies , LLC Home Security System DVST User Manual download pdf (Page 57)

10.3 Telephone Number Entries / Connection Commands

TELn=

Set telephone entry n to ...

(default, blank)

Twenty telephone numbers can be stored in memory.

Format: TEL2=01044617944965

If the MODEM or ISDN Terminal Adapter is to work in the DIRECT

mode, the entry can be left blank.

Telephone number 0 is the default number dialled when alarms are

used to initiate a call to another system. The fall back number if this is

engaged is always stored in telephone number 1.

Where a number is used with dual ISDN dialling it is automatically linked with that

number plus 10. Therefore Tel number 4 & 14 would be dialled if dual ISDN was

selected for that telephone number.

TELn

Set telephone entry n as current

This selects the number that will be dialled initially if the up/down keys

are not used to select another.

Format: TEL2

TYPEn=

Set telephone entry type to dial via ISDN0, ISDN1,

ISDNx2 (dual), or MODEM

(default, ISDN0)

Each of the telephone numbers can be linked to either a PSTN

MODEM or an ISDN terminal adapter.

This command determines which of the external ports (MODEM, ISDN

Port0, or ISDN Port1) will be used when a particular telephone number

is selected.

Format:

TYPE0=ISDN0

TYPE1=ISDN1

TYPE2=ISDN2

TYPE3=MODEM

TYPE4=MODEM2

Example: TYPE5=2

Sets Telephone entry 5 to ISDN2

Dedicated Micros Ltd Page 45

DVST Installation Guide Calls

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 79 80

No comments

Guardian Technologies , LLC Home Security System DVST User Manual Page 57